High quality diamond stone blade technical solutions

Along with the development of the market, the demand of stone is greatly increasing, in stone processing aspect, the demand ofdiamond stone tools is also becoming larger and larger. However, in the current Yunfu market, the quality of diamond blade is not good. Often starting with very sharp, but it will break off badly when the dimond tool cut half of the stone or the cutted number decline. And an hours of work needs multiple blades leads bad efficiency. Stone enterprises need efficient and cost-effective good diamond blades urgently. In view of the present situation, after many practice, a set of technical solutions for producting efficiency and quality diamond blade has been born Using diamond stone which has production stable performance, coarse, good thermal stability (ti) of tfi directly with high-strength. Diamond tools are basically consists of diamond stone and process conditions in fixed at work, mainly rely on the base of the diamond grinding and cutting to process different kinds of stone. Therefore, the quality of raw materials (diamond stone)and the concentration plays the decisive role of dimond tool To improve the proportioning of diamond grain. In traditional ratio, the head of blade must be sharp, using some more coarse diamond stone, conversely with fine diamond. Admittedly, but it always can not reach the best work efficiency. Because of the diamond stone's hardness and high elastic modulus, it hadrdly arouse plastic deformation in high temperature sintering. Choose good ratio, improve sinter diamond particles before the bulk density is useful to improve abrasion dimond stone tool. After repeated experiments, head of coarse and fine grain of three kinds of particle size, its best diamond proportion is 1:0227:0.071. The right welding procedure, nowadays dimond blade are using high-frequency induction，but it will be "burn" and fell head phenomena easily. It's not only safety but affect the production, therefore, using high strength, good permeability of silver soldering to enter into welding production process Comprehensive above, a high quality diamond blade means developed successfully. But the process of diamond tool production, also has many influencing factors. For example, according to different texture, the stone sawing machine has different adjustment, reasonable selection and right blades, give play to the function of the blade, thus obtained good effect.